Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 745
53-1000436-01
Extended Fabrics Command
3
Extended Fabrics Command
The following command is available with the purchase of a Brocade Extended Fabrics license key.
Fabric Watch Commands
The following commands are available with the purchase of a Brocade Fabric Watch license key.
TABLE 3 Extended Fabrics Commands
Command Description
portCfgLongDistance Configures a port to support long-distance links.
TABLE 4 Fabric Watch Commands
Command Description
fanShow Displays fan status and speed.
fwAlarmsFilterSet Enables or disable alarms for Fabric Watch.
fwAlarmsFilterShow Displays alarm filtering for Fabric Watch.
fwClassInit Initializes all classes under Fabric Watch.
fwConfigReload Reloads the Fabric Watch configuration.
fwConfigure Displays and enable modification of the Fabric Watch configuration and
status.
fwConfigure Displays and changes FRU state alert configuration.
fwMailCfg Configures email alerts in Fabric Watch.
fwPortDetailShow Displays the port information for specified user ports.
fwSamShow Displays switch availability monitor information.
fwSet Sets the parameters controlled by Fabric Watch.
fwSetToCustom Sets boundary and alarm levels to custom values.
fwSetToDefault Sets boundary and alarm levels to the default values.
fwShow Displays the thresholds monitored by Fabric Watch.
sensorShow Displays sensor readings.
switchStatusPolicySet Sets the policy parameters that determine overall switch status.
switchStatusPolicyShow Displays the policy parameters that determine overall switch status.
switchStatusShow Displays overall switch status.
tempShow Displays temperature readings.