Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 747
53-1000436-01
Secure Fabric OS Commands
3
Secure Fabric OS Commands
The following commands are available with the purchase of a Brocade Security license key. For
more detailed information about security, refer to the Secure Fabric OS Administrator’s Guide.
perfDelFilterMonitor Deletes a filter-based monitor.
perfMonitorClear Clears counters of end-to-end, filter-based, and ISL performance
monitors on a port.
perfMonitorShow Displays end-to-end, filter-based, and ISL monitors on a port.
perfShowPortEEMask Sets overall mask for end-to-end (EE) monitors.
perfShowAlpaCrc Displays the AL_PA CRC count by port or by AL_PA.
perfShowEEMonitor Displays user-defined end-to-end monitors on a port.
perfShowFilterMonitor Displays filter-based monitors for a port.
perfShowPortEEMask Displays the current end-to-end mask of a port.
TABLE 6 Performance Monitoring Commands (Continued)
Command Description
TABLE 7 Brocade Secure Fabric OS Commands
Command Description
pkiCreate Creates public key infrastructure (PKI) objects.
pkiRemove Removes existing public key infrastructure (PKI) objects.
pkiShow Displays existing public key infrastructure (PKI) objects.
secActiveSize Displays the size of the active security database.
secAuthSecret Manages the DH-CHAP shared secret key information.
secCertUtil Manages third-party PKI-based certificates in the switch.
secDefineSize Displays the size of the defined security database.
secFabricShow Displays security related fabric information.
secFCSFailover Enables a backup FCS switch to take over as primary FCS switch.
secGlobalShow Displays the current internal security state information.
secHelp Displays information about security telnet commands.
secModeDisable Disables security mode.
secModeEnable Enables security mode.
secModeShow Displays if security mode is enabled or disabled.
secNonFCSPasswd Sets the admin password for non-FCS switches.
secPolicyAbort Aborts all changes to the defined database that have not been saved.
secPolicyActivate Applies defined policy set to all switches in the fabric.
secPolicyAdd Adds members to an existing policy.
secPolicyCreate Creates a new policy.