Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

750 Fabric OS Command Reference Manual
53-1000436-01
Commands Exclusive to the Primary FCS
4
date This command can be run on all switches to view the current date. You can only
modify the date from the primary FCS switch.
defZone Must be run from the primary FCS switch.
defZoneCreate Must be run from the primary FCS switch.
defZoneDelete Must be run from the primary FCS switch.
fazoneAdd Must be run from the primary FCS switch.
fazoneCreate Must be run from the primary FCS switch.
fazoneDelete Must be run from the primary FCS switch.
fazoneRemove Must be run from the primary FCS switch.
fazoneShow Must be run from the primary FCS switch.
interopMode Must be run from the primary FCS switch.
msPlClearDB Must be run from the primary FCS switch.
msPlMgmtActivate Must be run from the primary FCS switch.
msPlMgmtDeactivate Must be run from the primary FCS switch.
msTdDisable msTdDisable “ALL” must be run from the primary FCS switch.
msTdEnable msTdEnable “ALL” must be run from the primary FCS switch.
passwd Must be run from the primary FCS switch.
secFabricShow Must be run from the primary FCS switch.
secFCSFailover Must be run from the backup FCS switch.
secModeDisable Must be run from the primary FCS switch.
secNonFCSPasswd Must be run from the primary FCS switch.
secPolicyAbort Must be run from the primary FCS switch.
secPolicyActivate Must be run from the primary FCS switch.
secPolicyAdd Must be run from the primary FCS switch.
secPolicyCreate Must be run from the primary FCS switch.
secPolicyDelete Must be run from the primary FCS switch.
secPolicyDump Can be run on all FCS switches.
secPolicyFCSMove Must be run from the primary FCS switch.
secPolicyRemove Must be run from the primary FCS switch.
secPolicySave Must be run from the primary FCS switch.
secPolicyShow Can be run on all FCS switches.
secTempPasswdReset Must be run from the primary FCS switch.
secTempPasswdSet Must be run from the primary FCS switch.
secVersionReset Must be run from the primary FCS switch. Can also be run on a single
non-FCS switch which is segmented from a fabric.
snmpConfig Community strings can be changed on the primary FCS switch only
TABLE 1 Commands Exclusive to the Primary FCS (Continued)
Command Notes