Brocade Fabric OS Command Reference Manual - Supporting Fabric OS v5.3.0 (53-1000436-01, June 2007)

Fabric OS Command Reference Manual 755
53-1000436-01
Chapter
6
supportShow Reference
This chapter explains the information displayed by the supportShow command. This chapter has
the following sections:
• “supportShow Control Commands,” next
• “supportShow Command Groups” on page 756
• “Proc Entry Information Displayed” on page 758
supportShow Control Commands
The supportShow command is used to display support information by executing groups of
preselected Fabric OS and Linux commands. The information displayed by the supportShow
command can be controlled by a set of control commands:
supportShowCfgShow Display which groups of commands are enabled to display under
supportShow.
supportShowCfgEnable Enable a group of commands to display under supportShow.
supportShowCfgDisable Disable a group of commands from displaying under supportShow.