Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

Fabric OS Documentation Addendum 1-3
Publication Number: 53-1000429-01-HP
ag
1
ag
Enables and manages the Access Gateway mode to perform AG specific operations.
Synopsis ag --show
ag --modeshow
ag --modeenable
ag --modedisable
ag --mapshow [N_Port]
ag --mapset <N_Port> <F_Ports>
ag --mapadd <N_Port> <F_Ports>
ag --mapdel <N_Port> <F_Ports>
ag --failovershow [N_Port]
ag --failoverdisable <N_Port>
ag --failoverenable <N_Port>
ag --failbackshow [N_Port]
ag --failbackdisable <N_Port>
ag --failbackenable <N_Port>
Description Use this command to enable and disable Access Gateway mode, to display the current configuration and
state, to configure and display the F_Port to N_Port mapping, and to configure N_Port failover and
failback policies. AG only supports embedded switch platforms that use the Goldneye ASIC.
Operands This command has the following operands:
--show Displays the N_Ports and F_Ports that are currently online, whether
they have failover enabled, and displays their mapping.
--modeshow Displays current mode of the switch, either an Access Gateway
mode or a native Fibre channel switch (FOS) mode.
--modeenable Enables the Access Gateway mode for a switch.
--modedisable Disables the Access Gateway mode for a switch.
--mapshow [N_Port] Displays the F_Ports that are mapped to a given N_Port. Current
F_Ports are the lists of F_Ports online through the specified N_Port.
N_Port is optional and if used, it displays the F_Ports that are
mapped to the specified N_Port only.
--mapset <N_Port F_Ports> Maps F_Ports to a specific N_Port to the fabric. Any F_Port can be
mapped to only one N_Port. F_Ports are enabled only if the N_Port
is online and NPIV is enabled on the fabric port that is connected to
Access Gateway.
--mapadd <N_Port> <F_Ports> Adds F_Ports to existing N_Port. The traffic for the configured
F_Ports to be routed to the fabric through the specified N_Port
when the F_Port comes online. An F_Port can be mapped to only
one N_Port. Specify the N_Port number to which the F_Ports are to