Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

1-44 Fabric OS Documentation Addendum

Publication Number: 53-1000429-01-HP

portshow Note: Enter commands in lowercase only; mixed case is for readability

To display the connection parameter information on an FCIP tunnel on a GbE port:

switch:admin> portshow fciptunnel ge1 0 -params

Port: ge1

-------------------------------------------

Tunnel ID 0

Remote IP Addr 192.168.255.200

Local IP Addr 192.168.255.100

Remote WWN Not Configured

Local WWN 10:00:00:05:1e:35:16:b9

Compression on

Fastwrite off

Tape Pipelining off

Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps)

SACK on

Min Retransmit Time 100

Keepalive Timeout 10

Max Retransmissions 8

Status : Active

Uptime 18 minutes, 36 seconds

FC control traffic TCP connection:

Local 192.168.255.100:4112, Remote 192.168.255.200:3225

Runtime parameters:

Send MSS 1448 Bytes

Sender stats:

smoothed roundtrip 10 ms, variance 13

peer advertised window 7499776 Bytes

negotiated window scale (shift count) 9

congestion window 99345 Bytes

slow start threshold 1073725440 Bytes

operational mode: slow start

0 packets queued: TCP sequence# NXT(1143470523)

0 packets in-flight

Send.Unacknowledged(TCP sequence# 1143470523) recovery:

retransmit timeout 100 ms, duplicate ACKs 0

retransmits 0 (max retransmits 8)

loss recovery: fast retransmits 0, retransmit timeouts 0

Receiver stats:

advertised window 7499776 Bytes (max 7499776)

negotiated window scale (shift count) 9

0 packets queued: TCP sequence# NXT(3863763167)

0 out-of-order packets queued (0 lifetime total)

[Output Truncated]