Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

Fabric OS Documentation Addendum 1-55
Publication Number: 53-1000429-01-HP
switchshow
1
Lock_Ref
Locking to the reference signal.
Testing Running diagnostics.
Offline Connection not established (for virtual ports only).
Online Port is up and running.
Proto Protocol support by GE port.
ISCSI Ports support ISCSI.
FCIP Ports support FCIP.
comment The comment field is blank, or displays:
Disabled
Port is disabled.
Bypassed
Port is bypassed (loop only).
Loopback
Port is in loopback mode.
E_Port Fabric port; displays WWN and name of attached switch. If the port is
configured as EX_Port, the WWN of the attached switch is the same as
the router.
F_Port Point-to-point port; displays WWN of attached N_Port.
G_Port Point-to-point but not yet E_Port or F_Port.
L_Port Loop port; displays number of NL_Ports.
EX_Port Router port; displays WWN of the attached edge switch.
Mirror Port The port is a mirror port.
(Trunk master)
Port is the master port in a group of trunking ports.
(Trunk port, master is port #x)
Port is configured as a trunking port; the master port is port #x.
(upstream)
E_Port is an upstream path toward the principal switch of the fabric.
(downstream)
E_Port is a downstream path away from the principal switch of the
fabric.
Persistently Disabled
This port has been disabled using portCfgPersistentDisable.
FICON Persistent DID
This port has been disabled since the switch could not obtain its
configuration domain ID during the fabric reconfiguration when
ficonMode was enabled. See ficonMode help page for more
information.
Fabric ID conflict
Two different fabrics have been assigned the same fabric ID ( EX_Ports