Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

1-56 Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
switchshow Note: Enter commands in lowercase only; mixed case is for readability
1
only).
Fabric ID oversubscribed
One fabric has been assigned two different fabric IDs (EX_Ports only).
If a port is configured as a long distance port, the long distance level is displayed in the format of Lx,
where x represents the long distance level number. See portCfgLongDistance for the level description.
Note
The port state for disabled E_Ports display as In_Sync when the port is the interswitch link (ISL) between
a SilkWorm 48000 and a SilkWorm 24000. If the ISL is between a SilkWorm 48000 and a SilkWorm
4100 or 200E, the disabled E_Port displays as No_Sync.
Operands The operand is as follows:
-portcount Causes the switchShow command to display the number of ports on the switch.
-iscsi Causes the switchShow command to display the number of ports on the iSCSI
sessions associated with GE ports in a switch.
Examples To display the port count:
To display GE ports with iSCSI sessions:
Note
When a port is configured as an N_Port and is online, switchShow displays its type as an N_Port. Also,
switchShow displays WWN of the of the border switch attached to this N_Port as a 24-bit Port
Identifier assigned to this port by the enterprise fabric.
switch:admin> switchshow -portcount
ports= 64
switch:admin> switchshow -iscsi
Ports of Slot 1 ge0 ge1 ge2 ge3 ge4 ge5 ge6 ge7
-----------------+---+---+---+---+-----+---+---+---
Sessions 0 0 0 0 0 0 0 0