Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

2-6 Fabric OS Documentation Addendum
Publication Number: 53-1000429-01-HP
AG-1012
2
AG-1012
Message
Probable
Cause
Indicates that the N_Port logout request sent to the fabric switch from the Access Gateway failed.
Recommended
Action
Verify the configuration of the fabric switch.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WA RNI NG
AG-1013
Message
Probable
Cause
Indicates that the F_Ports were failed over to another N_Port(s) that is connected to the same fabric.
Recommended
Action
Run the ag --mapshow command to display the updated F-Port to N-Port mapping.
Severity INFO
AG-1014
Message
Probable
Cause
Indicates that the N_Port is back online and the F_Ports have been failed back to the N_Ports to which
they were mapped.
Recommended
Action
Run the ag --mapshow command to display the updated F-Port to N-Port mapping.
Severity INFO
<timestamp>, [AG-1012], <sequence-number>,, WARNING, <system-name>,
FDISC sent from N-Port <port> failed
<timestamp>, [AG-1013], <sequence-number>,, INFO, <system-name>,
Failing over all F_Ports mapped to N_Port <port> to other N_Port(s)
<timestamp>, [AG-1014], <sequence-number>,, INFO, <system-name>,
Failing back F_Ports to mapped to N_Port <port>