Brocade Fabric OS Documentation Addendum - Supporting Fabric OS v5.2.x (53-1000429-01-HP)

Fabric OS Documentation Addendum 3-5

Publication Number: 53-1000429-01-HP

connUnitInfo 1.3.6.1.3.94.1.6.1.21

If the switch is principal, this is set to 3 (yes); otherwise, for a fabric switch it is set to 2 (no). For a

Brocade Access Gateway device, since the switch is behaving as a device management tool and not a

Fibre Channel switch, the value is set to 1 (unknown).

Values Possible values are:

• unknown (1)

• no (2)

• yes (3)

connUnitInfo 1.3.6.1.3.94.1.6.1.21

A display string containing information about this connectivity unit. This object value should be

persistent between boots.

For a fabric switch set to sysDescr and read-only.

For a Brocade Access Gateway device set to “Access Gateway.”

connUnitPortIndex 1.3.6.1.3.94.1.10.1.2

Number of physical ports between 0 and maximum number of system supported ports in the

connectivity unit (internal/embedded, external).

To determine the maximum number of system supported ports, use the SNMP GET command on

swFcPortCapacity.

Each switch supports 0 to maximum number of system supported ports. The maximum number of

supported ports is as follows:

Brocade 5000 32 ports

SilkWorm 3200, 3250 8 ports

SilkWorm 4012 12 ports

SilkWorm 200E, 3800, 3850 16 ports

SilkWorm 3900, 4100 32 ports

SilkWorm 4900 64 ports

SilkWorm 7500 32 ports

SilkWorm 12000 128 ports

SilkWorm 24000 128 ports

SilkWorm 48000 256 ports

connUnitPortType 1.3.6.1.3.94.1.10.1.3

The port type.

For EX_Port, VEX_Port and VE_Port, the port type will be shown as other. For a Brocade Access

Gateway device, the port type can be either F_Port (f-port) or N_Port (n-port) only.