Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

3-14 Fabric Watch Administrator’s Guide
Publication Number: 53-1000243-01
Configuring Fabric Watch Thresholds
3
change custom time base Changes the time base for the
area, but only affects the custom
column.
The required time base
change custom low Changes the low setting for the
threshold, but only affects the
custom column.
The required low threshold, in the
units defined by the area
change custom high Changes the high setting for the
threshold, but only affects the
custom column.
The required high threshold, in the
units defined by the area
change custom buffer Changes the buffer size for the
threshold, but only affects the
custom column.
The required buffer size, in the units
defined by the area
apply threshold boundary
changes
Confirms the changes made to the
threshold information. This must
be done to retain the changes
made.
None
cancel threshold boundary
changes
Returns the boundary information
to the last confirmed state.
None
change threshold alarm
level
Changes between the factory
default and custom event settings
for the area.
The required event setting column
change changed alarm Changes the notification method
for changed event occurrences for
this method, but only affects the
custom column.
The required notification methods
change above alarm Changes the notification method
for above event occurrences for
this method, but only affects the
custom column.
The required notification methods
Table 3-10 Advanced Configuration Options (Continued)
Option Effect Input Information