Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

3-18 Fabric Watch Administrator’s Guide
Publication Number: 53-1000243-01
Configuring Notifications
3
The following sections describe how to use the fwMailCfg menu options.
Show Mail Configuration Information
1. Type 1 in the fwMailCfg menu (shown in Figure 3-11) to view the current e-mail configuration
classes.
The Config Show menu (shown in Figure 3-6) displays.
Figure 3-6 Config Show Menu
The Config Show menu lists each class for which you can provide a separate e-mail address.
2. Type the number corresponding to the class for which the e-mail configuration should be displayed.
Fabric Watch displays information such as:
The system returns to the main fwMailCfg menu.
Disable E-mail Alert
1. Type 2 in the fwMailCfg menu (shown in Figure 3-11) to disable e-mail alerts for a specific class.
The Config Show menu (shown in Figure 3-6) displays.
2. Select a class for which Fabric Watch should disable e-mail alerts.
The following confirmation message displays:
The system returns to the main fwMailCfg menu.
Config Show Menu
____________________________
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource class
12 : FRU class
13 : Quit
Select an item => : (1..13) [13]
Mail Recipient Information
____________________________________
Email Alert = enabled
Mail Recipient = [e-mail]
Email Alert is disabled!