Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

Fabric Watch Administrator’s Guide 3-29

Publication Number: 53-1000243-01

Configuring Fabric Watch Using SNMP

6. Expand the tree on the left to find the Fabric Watch OID information. To find the OID, use the

following hierarchy: SW-MIB, bcsi, commDev, fibrechannel, fcSwitch, sw, swFwSystem.

Fabric Watch displays a screen similar to the one shown in Figure 3-7.

Figure 3-7 Example OID Tree

7. Obtain the specific identifier for the element that will be modified. To get the identifier, click the

swFwThresholdTable and swFwThresholdEntry directory, and run a get operation on swFwName.

A list of elements appears in which each element is preceded by an identifier. Remember the

numeric portion of the identifier, which appears before the “==>” symbol. You can scroll through

the list to find the numeric identifier for the element in which you are interested.

Figure 3-7 shows a sample screen.