Brocade Fabric Watch Administrator's Guide (53-1000243-01, November 2006)

4-8 Fabric Watch Administrator’s Guide
Publication Number: 53-1000243-01
Viewing Fabric Watch Reports
4
Viewing Fabric Watch Reports
You can view Fabric Watch reports in the following ways:
• “Viewing Fabric Watch Reports Using Telnet,” next
• “Viewing Fabric Watch Reports Using Web Tools” on page 4-8
Viewing Fabric Watch Reports Using Telnet
To view Fabric Watch reports using telnet, start a telnet session and enter the command (from Table 4-3)
corresponding to the report you want to view.
Viewing Fabric Watch Reports Using Web Tools
To view Fabric Watch reports using Web Tools, connect to a switch using a web browser, and select the
report button (shown in Figure 4-1).
Figure 4-1 Report Button
Table 4-3 Telnet Commands for Viewing Fabric Watch Reports
Use the Command To View
fwSamShow Port failure rate report
switchStatusShow Switch health report
switchStatusPolicyShow Switch status policy report
fwPortDetailShow
fwPortDetailShow --s h
fwPortDetailShow --s m
fwPortDetailShow --s f
fwPortDetailShow --s o
Port detail report
To view only health ports
To view only marginal ports
To view only faulty ports
To view only offline ports