Fabric OS Encryption Administrator's Guide v6.4.0 (53-1001864-01, June 2010)

202 Fabric OS Encryption Administrator’s Guide
53-1001864-01
Errors related to adding a switch to an existing group
6
Create a new master key (if the key
vault type is not NetApp)
A failure occurred while attempting to
create a new master key.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2Re-run the Configure Switch Encryption wizard for
the switch.
Manual Option:
1Launch the Encryption Group Properties dialog box,
and click Security.
2Click the Master Key Action button and select Create
New Master Key to generate a new master key.
Save the switch’s public key
certificate to a file.
The switch’s public key certificate could
not be saved to a file.
Note: Verify that the path name and the
file name that you are using are both
valid and that you have write
permissions for the file.
1 Remove the switch from the group using the Group
Members tab on the Encryption Group Properties
dialog box.
2Re-run the Configure Switch Encryption wizard for
the switch.
Manual Option:
1 Save the switch’s public key certificate to a file using
the Switch Encryption Properties dialog box.
2 Follow the Key Vault instructions
TABLE 12 Error recovery instructions for adding a switch to a new group (Continued)
Configuration task Error description Instructions