Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2.0 (53-1001187-01, April 2009)

20 Fabric OS Troubleshooting and Diagnostics Guide
53-1001187-01
Third party applications
2
Third party applications
Symptom Replication application works for a while and then an error or malfunction is reported.
Probable cause and recommended action
Some third party applications will work when they are first set up and then cease to work because
of an incorrect parameter setting. Check each of the following parameters and your application
vendor documentation to determine if these are set correctly:
• Port-base routing
Use the aptPolicy command to set this feature.
• In-order delivery
Use the iodSet command to turn this feature on and the iodReset command to turn this
feature off.
• Load balancing
In most cases this should be set to off. Use the dlsReset command to turn off the function.