HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

104 Configuring standard security features
Setting up SCP for configuploads and downloads
1. Log in to the switch as admin.
2. Issue the configure command.
3. Enter y or yes at the cfgload attributes prompt.
4. Enter y or yes at the Enforce secure config Upload/Download prompt.
Example of setting up SCP for config upload/download:
switch:admin> configure
Not all options will be available on an enabled switch.
To disable the switch, use the "switchDisable" command.
Configure...
System services (yes, y, no, n): [no] n
ssl attributes (yes, y, no, n): [no] n
http attributes (yes, y, no, n): [no] n
snmp attributes (yes, y, no, n): [no] n
rpcd attributes (yes, y, no, n): [no] n
cfgload attributes (yes, y, no, n): [no] y
Enforce secure config Upload/Download (yes, y, no, n): [no] y
Enforce signature validation for firmware (yes, y, no, n): [no]
Listener applications
Brocade switches block Linux subsystem listener applications that are not used to implement supported
features and capabilities. Table 20 lists the listener applications that Brocade switches either block or do
not start.
Table 20 Blocked listener applications
Listener
application
4/256 SAN Director and DC
Director
HP StorageWorks 4/8 or 4/16, 8/8
SAN Switch, 8/24 SAN Switch,
8/40 SAN Switch, 8/80 SAN
Switch, Brocade 4Gb SAN Switch
for HP p-Class BladeSystem,
Brocade 4Gb SAN Switch for HP
c-Class BladeSystem, SAN Switch
4/32, 4/64 SAN Switch, SAN
Switch 4/32B, 400 Multi-protocol
(MP) Router
chargen Disabled Disabled
echo Disabled Disabled
daytime Disabled Disabled
discard Disabled Disabled
ftp Disabled Disabled
rexec Block with packet filter Disabled
rsh Block with packet filter Disabled
rlogin Block with packet filter Disabled
time Block with packet filter Disabled
rstats Disabled Disabled
rusers Disabled Disabled