HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

Fabric OS 6.1.1 administrator guide 193
BrcdDCXBB:admin> firmwareshow -v
Slot Name Appl Primary/Secondary Versions Status
------------------------------------------------------------------------
6 CP0 FOS v6.1.0 ACTIVE *
v6.1.0
Co-FOS v6.1.0
v6.1.0
7 CP1 FOS v6.1.0 STANDBY
v6.1.0
Co-FOS v6.1.0
v6.1.0
* Local CP
The firmwareDownloadStatus command displays an event log that records the progress and status of
events during firmwaredownload. The event log is created by the current firmwareDownload
command and is kept until another firmwareDownload command is issued. When downloading Fabric
OS, the event logs in the two CPs are synchronized. This command can be run from either CP.
The nsShow command displays all devices directly connected to the switch that have logged into the name
server. Make sure the number of attached devices after the firmware download is exactly the same as the
number of attached devices prior to the firmware download.
The nsAllShow command displays all connected devices to a fabric. Make sure the number of attached
devices after the firmware download is exactly the same as the number of attached devices prior to the
firmware download.
The fabricShow command displays all switches in a fabric. Make sure the number of switches in the
fabric after the firmware download is exactly the same as the number of attached devices prior to the
firmware download.