HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

Fabric OS 6.1.1 administrator guide 233
Setting chassis configuration options for the 4/256 Director
The chassisConfig command allows you to display or set the chassis configuration on the 4/256
Director.
The 4/256 Director allows you to use chassis configuration options 1 and 5. Configuration option 1 is
compatible with FC4-16 blades; configuration option 5 is compatible with FC8-16, FC4-16IP, FC4-16,
FC4-32, FR4-18i, FC4-48, FC8-32, and FC8-48 blades.
NOTE: The DC Director does not have separate configuration options, so the chassisConfig
command is not supported on this platform. By default, the DC Director supports 384 ports in a single
Fibre Channel domain.
Table 66 lists the supported configuration options for the 4/256 Director.
Table 67 lists platform configuration options and resulting slot configurations.
Table 65 Port blades supported by each Director
Port blades
Director
4/256 Director
(CP4)
DC Director
FC2-16 Supported
1
1. Can coexist only with FC4-16 blades.
N/A
FC4-16 Supported N/A
FC4-32 Supported N/A
FC4-48 Supported N/A
FC8-16 Supported Supported
FC8-32 Supported Supported
FC8-48 Supported Supported
FC10-6 Supported Supported
FC4-16IP Supported N/A
FR4-18i Supported Supported
Table 66 Supported configuration options
Option Number
of
domains
Maximum
number of ports
per switch
Supported port blades Supported
CP blades
Notes
1 1 128 FC2-16, FC4-16 CP2 or CP4
5 1 384 FC4-16, FC8-16,
FC4-16IP, FC4-32,
FC4-48
1
, FR4-18i,
FC8-32, FC8-48 and
FA4-18 FC10-6
1. L_Ports are not supported on the FC4-48 blade.
CP4 Option 5 is the
default configuration
option for the 4/256
Director.