HP StorageWorks Fabric OS 6.1.1 administrator guide (5697-0235, December 2009)

Fabric OS 6.1.x administrator guide 259
Supported iSCSI initiators
Checklist for configuring iSCSI
Configure the iSCSI gateway service after you install the FC4-16IP blade in the 4/256 SAN Director.
Table 70 provides a high-level overview of the commands and links to the sections that detail the
procedures. See the Fabric OS Command Reference for detailed information on the commands.
Table 69 lists iSCSI intitiators supported by the iSCSI gateway service.
Table 69 Supported iSCSI initiators
iSCSI initiator driver versions
Windows
• MS iSCSI initiator 2.02
• MS iSCSI initiator 2.03
• MS iSCSI initiator 2.04
Linux
• RH EL 4 default initiator
• RH 4 Advanced server, Update 4 (default initiator)
• RH 5 Advanced server (default initiator)
• 2.6.10 - 4.0.2 iSCSI initiator (SourceForge,Net initiator)
• 2.4.20 - 3.6.2 iSCSI initiator (SourceForge,Net initiator)
•SUSE 9
• SUSE 9, SP3 (default initiator)
• SUSE 10 (default initiator)
HP-UX
• 11i v1 - B11.11.03e
• 11i v1 - B.11.23.03e
• 11i v2 - B.11.23.03e
NIC/TOE cards
iSCSI HBAs
• Alacritech SES2002XT
• Alacritech 2000
• QLogic 4050c
• QLogic 4052
• HP NC3xx
Table 70 iSCSI target gateway configuration steps
Step Command Procedure
1 Activate iSCSI for the
FC4-16IP.
fosConfig --enable iscsi ”Enabling the iSCSI gateway
service” on page 262
2 Configure the IP address
for GbE port(s).
portCfg ipif <slot>/ge<port>
create <ipaddress> <netmask>
<mtu_size>
”Configuring the GbE
interface” on page 263
3 Optional) Configure the
IP route for the GbE
port(s).
portCfg iproute
<slot>/ge<port> args
”Configuring the GbE
interface” on page 263
4 (Easy) Automatically
maps FC targets to iSCSI
targets and names
target with unique IQN.
iscsiCfg --easycreate tgt ”Automatic iSCSI VT creation”
on page 265