HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

ManualsBrandsHP ManualsStorageHP StorageWorks 4/32B SAN Switch

451

452

453

454

455

456

457

458

459

460

460 Configuring and monitoring FCIP extension services

2 OFF OFF OFF OFF OFF OFF

3 OFF OFF OFF OFF OFF OFF

4 OFF OFF OFF OFF OFF OFF

5 OFF OFF OFF OFF OFF OFF

6 OFF OFF OFF OFF OFF OFF

7 OFF OFF OFF OFF OFF OFF

PARAMETERS

TunnelId WrtPipe RdPipe WrtDevs RdDevs WrtTimer WrtChain OxidBase

DebugFlags

0 000 000 00 00 0000 0000000 0x0000 0x00000000

1 000 000 00 00 0000 0000000 0x0000 0x00000000

2 000 000 00 00 0000 0000000 0x0000 0x00000000

3 000 000 00 00 0000 0000000 0x0000 0x00000000

4 000 000 00 00 0000 0000000 0x0000 0x00000000

5 000 000 00 00 0000 0000000 0x0000 0x00000000

6 000 000 00 00 0000 0000000 0x0000 0x00000000

7 000 000 00 00 0000 0000000 0x0000 0x00000000

FTRACE output control and display

The portshow ftrace command can be used to control and display FTRACE output. The capitalized

letters in the options represent the minimum set of characters that must be entered. Control arguments that

change configuration parameters (such as buffers) are not saved in persistent memory.

NOTE: This command is primarily for use by technical support personnel.

portShow ftrace [slot/]ge0|ge1 tunnel-id arguments

slot Specify the slot number of a blade in a multi-slot chassis.

ge0|ge1 The Ethernet port (ge0 or ge1).

tunnel-id Tunnel number (0-7).

arguments are as follows.

ACO on|off Enable/Disable/Display Auto Check Out.

ACTivate 0-xx Activate trace 'xx' for viewing.

AScii (8

characters)

Set/reset the ASCII filter.

B Display the bottom (most recent) trace.

BUffers n Specify the number of buffers to configure for a tunnel.

CCfg Display the current FTRACE configuration.

CI xx | all Check In trace buffer 'xx', or all buffers.

CO xx | all Check Out trace buffer 'xx', or all buffers.

COA xx Check out and activate trace buffer xx.

COMmand Set/Reset the FICON command frame filter.

CONfig xx|all Activate a configuration.

DControl Set/Reset the FICON device control frame filter.

DISAble Disable traces for a tunnel.

DISPlaymask Set/Display the display mask (0-FFFFFFFF).