HP StorageWorks Fabric OS 6.x administrator guide (5697-7344, March 2008)

86 Configuring standard security features
Blocking listeners
HP switches block Linux subsystem listener applications that are not used to implement supported features
and capabilities. Table 18 lists the listener applications that Brocade switches either block or do not start.
Accessing switches and fabrics
If you are using the FC-FC Routing Service, be aware that the secModeEnable command is no longer
supported in Fabric OS 6.x.
Table 19 lists the defaults for accessing hosts, devices, switches, and zones.
Table 18 Blocked listener applications
Listener application 4/256 SAN Director and DC SAN
Backbone Director (short name, DC
Director)
HP StorageWorks 4/8 SAN Switch, 4/16
SAN Switch, Brocade 4Gb SAN Switch for
HP p-Class BladeSystem, Brocade 4Gb
SAN Switch for HP c-Class BladeSystem,
SAN Switch 4/32, 4/64 SAN Switch, SAN
Switch 4/32B, 400 Multi-protocol Router
FC10-6, FC4-48, FC4-16IP, FC8-16,
FC8-32, FC8-48, and FR4-18i blades
chargen Disabled Disabled
echo Disabled Disabled
daytime Disabled Disabled
discard Disabled Disabled
ftp Disabled Disabled
rexec Block with packet filter Disabled
rsh Block with packet filter Disabled
rlogin Block with packet filter Disabled
time Block with packet filter Disabled
rstats Disabled Disabled
rusers Disabled Disabled
Table 19 Access defaults
Access default
Hosts Any host can access the fabric by SNMP
Any host can Telnet to any switch in the fabric
Any host can establish an HTTP connection to any switch in the fabric
Any host can establish an API connection to any switch in the fabric
Devices All devices can access the Management Server
Any device can connect to any FC port in the fabric
Switch access Any switch can join the fabric
All switches in the fabric can be accessed through a serial port
Zoning No zoning is enabled