Brocade Access Gateway Admin Guide v6.1.0 (53-1000605-02, June 2008)

Access Gateway Administrator’s Guide 29
53-1000605-02
Access Gateway N_Port trunking
2
7 7 -- N8 No_Module
8 8 id N4 Online F-Port 10:00:00:00:00:01:00:00
9 9 -- N8 No_Module
10 10 -- N8 No_Module
11 11 -- N8 No_Module
12 12 -- N8 No_Module
13 13 -- N8 No_Module
14 14 -- N8 No_Module
15 15 -- N8 No_Module
16 16 -- N8 No_Module
17 17 -- N8 No_Module
18 18 -- N8 No_Module
19 19 -- N8 No_Module
20 20 -- N8 No_Module
21 21 -- N8 No_Module
22 22 -- N8 No_Module
23 23 -- N8 No_Module
24 24 -- N8 No_Module
25 25 -- N8 No_Module
26 26 -- N8 No_Module
27 27 -- N8 No_Module
28 28 -- N8 No_Module
29 29 -- N8 No_Module
30 30 -- N8 No_Module
31 31 -- N8 No_Module
32 32 id N4 No_Light
33 33 id N4 No_Light
34 34 id N4 No_Light
35 35 id N4 No_Light
36 36 id N4 Online F-Port 20:14:00:05:1e:41:4b:4d
37 37 id N4 Online F-Port 20:15:00:05:1e:41:4b:4d
38 38 id N4 Online F-Port 20:16:00:05:1e:41:4b:4d
39 39 id N4 Online F-Port 2 NPIV public
5. Display TA enabled port configuration:
switch:admin> porttrunkarea --show enabled
Port Type State Master TA DA
-------------------------------------
36 -- -- -- 37 36
37 -- -- -- 37 37
38 -- -- -- 37 38
39 -- -- -- 37 39
Disabling F_Port trunking
1. Connect to the switch and log in as admin.
2. Enter the porttrunkarea --disable
command.
switch:admin> porttrunkarea --disable 36-39
ERROR: port 36 has to be disabled
Disable each port prior to removing ports from the TA. Then reissue the command:
switch:admin> porttrunkarea --disable 36-39
Trunk area 37 disabled for ports 36, 37, 38 and 39.