Brocade Access Gateway Admin Guide v6.1.0 (53-1000605-02, June 2008)

Access Gateway Administrator’s Guide 51
53-1000605-02
Port configurations
4
The following table shows the default F_Port-to-N_Port mapping that is automatically configured
when Access Gateway mode is enabled. All N_Ports have failover and failback enabled. All ports
must have the POD license active to use Access Gateway on the Brocade 300 and 200E.
.
TABLE 9 Access Gateway default F_Port-to-N_Port mapping
Brocade
Model
Total Ports F_Ports N_Ports Default F_ to N_Port Mapping
300 24 0-15 16 -23 0, 1 mapped to 16
2, 3 mapped to 17
4, 5 mapped to 18
6 , 7 mapped to 19
8, 9 mapped to 20
10, 11 mapped to 21
12, 13 mapped to 22
14, 15mapped to 23
200E 16 0-11 12-15 0, 1, 2 mapped to 12
3, 4, 5 mapped to 13
6, 7, 8 mapped to 14
9, 10, 11 mapped to 15
4012 12 0–7 8–11 0, 1 mapped to 8
2, 3 mapped to 9
4, 5 mapped to 10
6, 7 mapped to 11
4016 16 0–9 10–15 0, 1 mapped to 10
2, 3 mapped to 11
4, 5 mapped to 12
6, 7 mapped to 13
8 mapped to 14
9 mapped to 15
4018 18 4-11 0-3 4, 5, 12 mapped to 0
6, 7, 13 mapped to 1
8, 9, 14, 16 mapped to 2
10, 11, 15, 17 mapped to 3
4020 20 1–14 0, 15–19 1, 2 mapped to 0
3, 4 mapped to 15
5, 6, 7 mapped to 16
8, 9 mapped to port 17
10, 11 mapped to 18
12, 13, 14 mapped to 19