Brocade Access Gateway Admin Guide v6.1.0 (53-1000605-02, June 2008)

Access Gateway Administrator’s Guide vii
53-1000605-02
About This Document
This document is a procedural guide to help SAN administrators configure and manage Brocade
Access Gateway.
This preface contains the following sections:
•How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
•Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
•What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
•Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii
•Key terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
•Additional information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
•Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
•Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
How this document is organized
The document contains the following topics:
• Chapter 1, “Getting Started” describes how to use Access Gateway to create seamless
connectivity to any Storage Area Network (SAN) fabric.
• Chapter 2, “Enabling Policies on Switches in Access Gateway Mode”describes how to enable
policies on a switch in Access Gateway mode.
• Chapter 3, “Connecting Devices Using Access Gateway” describes how to connect multiple
devices using Access Gateway.
• Chapter 4, “Configuring Ports in Access Gateway mode” describes how to configure ports in
Access Gateway mode.
• Appendix A, “Troubleshooting” provides symptoms and troubleshooting tips to resolve issues.
Supported hardware and software
Although many different software and hardware configurations are tested and supported by
Brocade Communications Systems, Inc. For v6.1.0, documenting all possible configurations and
scenarios is beyond the scope of this document. All Fabric OS switches must be running v5.1 or
later; all M-EOS switches must be running M-EOSc 9.1 or later, M-EOSn must be running 9.6.2 or
later, and Cisco switches with SAN OS must be running 3.0 (1) and 3.1 (1) or later. Access Gateway
supports 4 and 8 Gbit bladed servers and blades.