Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602-02, June 2008)

466 Fabric OS MIB Reference
53-1000602-02
entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7
4
entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7
The textual name of the physical entity (physical name of the entity such as chassis, blade, port,
and so on). The value of this object should be the name of the component as assigned by the local
device and should be suitable for use in commands entered at the device’s “console.” This might
be a text name, such as “console,” or a simple component number (for example, port or module
number) such as 1, depending on the physical component naming syntax of the device.
If there is no local name, or this object is otherwise not applicable, then this object contains a
zero-length string.
Note that the value of entPhysicalName for two physical entities is the same in the event that the
console interface does not distinguish between them (for example, slot-1 and the card in slot-1).
The name provides the type of the entry and its number (for example, slot 1, power supply, and so
on). The description gives the textual description of the type of the entry (for example, power
supply, module, and so on)