Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602-02, June 2008)

518 Fabric OS MIB Reference
53-1000602-02
sw Traps
5
sw Traps
This section contains descriptions and other information that is specific to sw Traps.
Refer to Table 13 for the six traps defined in the SW.MIB, when it occurs, and how to configure the
trap, if possible.
SwFwEvent Integer Possible events available:
1 started
2 changed
3 exceeded
4 below
5 above
6 inBetween
SwFwBehavior Integer Behavior type for thresholds:
1 triggered
2 continuous
SwFwState Integer State type for last events:
1 swFwInformative
2 swFwNormal
3 swFwfaulty
SwFwLicense Integer License state:
1 swFwLicensed
2 swFwNotLicensed
TABLE 12 SW-MIB Textual Conventions (Continued)
Type Definition Value Description
TABLE 13 SW MIB Traps
Name Specific When Configure
“swFault
1.3.6.1.4.1.1588.2.1.1.1.0.1” on
page 520
(not supported)
1 During boot, if diagnostics fail N.A.
“swSensorScn
1.3.6.1.4.1.1588.2.1.1.1.0.2” on
page 521
2Obsolete N.A.
“swFCPortScn
1.3.6.1.4.1.1588.2.1.1.1.0.3” on
page 522
3 Port changes state Always on
“swEventTrap
1.3.6.1.4.1.1588.2.1.1.1.0.4” on
page 523
4 Switch event Refer to the Fabric OS Command Reference
and the snmpConfig command for more
information.
“swFabricWatchTrap
1.3.6.1.4.1.1588.2.1.1.1.0.5” on
page 524
5 Threshold reached Fabric OS Command: fwConfigure
“swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1.0.6” on
page 525
6 Log in/log out Fabric OS Command: trackChangesSet and
trackChangesShow