Brocade Fabric OS MIB Reference Guide v6.1.0 (53-1000602-02, June 2008)

930 Fabric OS MIB Reference
53-1000602-02
connUnitPortControl 1.3.6.1.3.94.1.10.1.16
8
• Addition of the port from an arbitrated loop by a hub.
Each implementation might choose not to allow any or all of these values on a SET.
If the management station uses in-band communication (FC-IP) with the switch, either of
the two following actions might result in a loss of in-band communication with the switch.
• Disabling the FC port that is connected to the management station
• Disabling the embedded port
• Return values are:
- resetConnUnitPort portDisable (F or E_Port, loop for U_Port)
- bypassConnUnitPort portDisable (FL_Port)
- unbypassConnUnitPort portEnable (FL_Port)
- offlineConnUnitPort portDisable (E, F, FL_Port)
- onlineConnUnitPort portEnable (U)
- resetConnUnitPortCounters clear the port statistics counter. When rebooted, this
defaults to 1 (unknown).