Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

Fabric OS MIB Reference 149

53-1002151-01

Fibre Channel port group

This group contains information about the physical state, operational status, performance, and

error statistics of each Fibre Channel port on the switch. A Fibre Channel port is one which

supports the Fibre Channel protocol, such as F_Port, E_Port, U_Port, or FL_Port.

swAgtTrapRcp

1.3.6.1.4.1.1588.2.1.1.1

.4.11.1.3

Read-write This is the trap recipient associated with the community. If a new value

is set successfully, it takes effect immediately.

If not otherwise set, the default IP address for this trap recipient is

0.0.0.0 and the SNMP trap is not sent for the associated community

string.

With a setting of non-0.0.0.0 IP address, SNMP traps are sent to the

host with the associated community string.

Any or all of the trap recipients can be configured to send a trap for the

associated community string. The maximum number of trap recipients

that can be configured is six. If no trap recipient is configured, no traps

are sent.

The trap recipient IP address should be part of the Access Control List

for Fabric OS v2.6.1, v3.1, and v4.x (refer to the Fabric OS Command

Reference and the snmpConfig command for more information).

swAgtTrapSeverityLevel

1.3.6.1.4.1.1588.2.1.1.1

.4.11.1.4

Read-write This is the trap severity level associated with “swAgtTrapRcp”.

The trap severity level, is in conjunction with the event’s severity level.

When an event occurs, and if its severity level is at or below the set

value, the SNMP trap is sent to configure trap recipients. The severity

level is limited to particular events. If a new value is set successfully, it

takes effect immediately.

This object obsoletes “swEventTrapLevel”.

Object and OID Access Description