Brocade Fabric OS MIB Reference Supporting Fabric OS v7.0.0 (53-1002151-01, April 2011)

210 Fabric OS MIB Reference
53-1002151-01
Connectivity unit group
9
connUnitPortFCClassCap
1.3.6.1.3.94.1.10.1.4
Read only Bit mask that specifies the classes of service capability of this port. If
this is not applicable, return all bits set to 0.
The bits have the following definition:
• unknown 0
• class-f 1
• class-one 2
• class-two 4
• class-three 8
• class-four 16
• class-five 32
• class-six 64
For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port,
this value is 0x000D.
For a Brocade Access Gateway, both the F_Port and N_Port this value is
0x0008. An Access Gateway supports class-three services only,
therefore the value is 8 for both port types.
connUnitPortFCClassCap attribute is dependent on the state of the port,
that is, whether the port is online or offline. If the port is offline, the
class service of U port will be shown as value of onnUnitPortFCClassCap.
If it is online, then this mib attribute value will be equal to class service
corresponding to the port type (F, E, L port.)
connUnitPortFCClassOp
1.3.6.1.3.94.1.10.1.5
Read only Bit mask that specifies the classes of service that are currently
operational. If this is not applicable, return all bits set to 0. This object
has the same definition as connUnitPortFCClassCap.
For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port,
this value is 0x000D.
For a Brocade Access Gateway both the F_Port and N_Port this value is
0x0008. A Brocade Access Gateway supports class-three services only,
therefore the value is 8 for both port types.
connUnitPortFCClassOp is independent of the state of the port (online or
offline). Its value is only dependent on the port type.
connUnitPortState
1.3.6.1.3.94.1.10.1.6
Read only The state of the port hardware.
Possible values are:
• unavailable (1) - Do not use.
• online (2) - Available for meaningful work.
• offline (3) - Not available for meaningful work.
• bypassed (4) - No longer used.
• diagnostics (5) - Map to your testing. (Not supported in Fabric OS
v2.6.1.)
For an E, F, or FL_Port, the value is online. For a U_Port, the value is
offline (disabled, testing, faulted).
Object and OID Access Description