Brocade Access Gateway Administrator's Guide Supporting Fabric OS v7.0.0 (53-1002156-01, April 2011)

76 Access Gateway Administrator’s Guide
53-1002156-01
Troubleshooting
A
Access Gateway is mode
not wanted
Access Gateway must be disabled. Disable switch using the switchDisable command.
Disable Access Gateway mode using
the ag
--modeDisable command.
Answer yes when prompted; the switch reboots.
Log in to the switch.
Display the switch settings using the switchShow command. Verify
that the field switchMode displays Fabric OS Native mode.
“Login Rejected by FC
stack” messages on
console may be seen
during F_Port and N_Port
disruptions on Brocade
8000 in Access Gateway
Mode.
The CNA host is retrying a login before
the switch has finished precessing a
previous fabric logout (LOGO) attempt.
Messages display as designed. After the switch has completed LOGO
processing, it will accept another login.
“Login Rejected by FC
stack” messages on
console may be seen
during F_Port and N_Port
disruptions on Brocade
IB 8470 in AG Mode.
The CNA host is retrying a log in before
the switch has finished precessing a
previous fabric logout (LOGO) attempt.
Working as designed. After the switch has completed LOGO
processing, it will accept another login.
TABLE 10 Troubleshooting (Continued)
Problem Cause Solution