Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 87
53-1000244-02
B
MISCELLANEOUS COMMANDS
Table 3 lists which miscellaneous commands, including management server and SNMP
commands, can be executed on which switches. Commands not listed here (or in the preceding two
tables) can be executed on any switch.
zoneAdd Yes No No
zoneCreate Yes No No
zoneDelete Yes No No
zoneObjectRename Yes No No
zoneRemove Yes No No
zoneShow Yes No No
TABLE 3 Miscellaneous Commands
Command Primary FCS Switch Backup FCS Switch Non-FCS Switch
agtcfgDefault Yes Yes (except cannot modify
community strings)
Yes (except cannot modify
community strings)
agtcfgSet Yes Yes (except cannot modify
community strings)
Yes (except cannot modify
community strings)
configUpload Yes Yes Not recommended.
The zoning and
Secure Fabric OS
configurations are not
uploaded if entered on a
non-FCS switch.
date Yes Yes (read only) Yes (read only)
date <operand to set
time>
Yes No No
msCapabilityShow Yes Yes Yes
msConfigure Yes (except ACL does not
display)
Yes (except ACL does not
display)
Yes (except ACL does not
display)
msPlatShow Yes Yes Yes
msplClearDB Yes No No
msplMgmtActivate Yes No No
msplMgmtDeactivate Yes No No
mstdDisable Yes Yes Yes
mstdDisable “all” Yes No No
mstdEnable Yes Yes Yes
mstdEnable “all” Yes No No
mstdReadConfig Yes Yes Yes
passwd Yes No No
TABLE 2 Zoning Commands (Continued)
Command Primary FCS Switch Backup FCS Switch Non-FCS Switch