Brocade Secure Fabric OS Administrator's Guide - Supporting Fabric OS v3.2.0, v4.4.0, v5.0.1, v5.1.0, 5.2.0, and 5.3.0 (53-1000244-02, June 2007)

Secure Fabric OS Administrator’s Guide 63
53-1000244-02
4
The names of the Secure Fabric OS statistics and their definitions are provided in Table 16.
TABLE 16 Secure Fabric OS Statistics
Statistic Definition
API_POLICY The number of attempted violations to the API policy (includes automated
attempts made by client software).
AUTH_FAIL
(SLAP failures)
The switch received a SLAP that it could not verify, possibly due to bad
certificates, bad signature, the other side not performing SLAP, or SLAP packets
that were received out of sequence. This counter is not advanced if SLAP
protocol does not complete, which can happen when a switch that does not
have secure mode enabled is attached to a switch that does.
DCC_POLICY The number of attempted violations to the DCC policy.
Note: Fabric OS v4.4.0, v5.0.1, v5.1.0, and v5.2.0 increases the counter by 1
for each drive in a JBOD; Fabric OS v3.2.0 increases the counter by 1 for the
entire JBOD.
FRONTPANEL_POLICY The number of attempted violations to the Front Panel policy.
HTTP_POLICY The number of attempted violations to the HTTP policy.
ILLEGAL_CMD
(illegal command)
The number of times a command is issued on a switch where it is not allowed
(such as entering secModeDisable on a non-FCS switch).
INCOMP_DB (incompatible
Secure Fabric OS database)
Secure Fabric OS databases are incompatible; might be due to different version
numbers, time stamps, FCS policies, or secure mode status.
INVALID_CERT
(invalid certificates)
A received certificate is not properly signed by the root CA of the receiving
switch.
INVALID_SIGN
(invalid signatures)
A received packet has a bad signature.
INVALID_TS
(invalid timestamps)
A received packet has a time stamp that differs from the time of the receiving
switch by more than the maximum allowed difference.
LOGIN The number of invalid login attempts.
MS_POLICY The number of attempted violations to the MS policy.
NO_FCS (no fabric
configuration server)
The number of times the switch has simultaneously lost contact with all the
switches in the FCS list.
RSNMP_POLICY The number of attempted violations to the RSNMP policy.
SCC_POLICY The number of attempted violations to the SCC policy.
SERIAL_POLICY The number of attempted violations to the Serial policy.
SES_POLICY The number of attempted violations to the SES policy.
SLAP_BAD_PKT
(SLAP bad packets)
SLAP packets are received with a bad transaction ID.
TELNET_POLICY The number of attempted violations to the Telnet policy (includes automated
attempts made by client software).
TS_OUT_SYNC
(TS out of synchronization)
The time server (TS) is out of synchronization with the primary FCS switch.
WSNMP_POLICY The number of attempted violations to the WSNMP policy.