Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 101
53-1000599-02
defZone
2
--allaccess Sets the default zone access mode to All Access, initiates a zoning
transaction (if one is not already in progress), and deletes the reserved
zoning objects by performing the equivalent to the following zoning
commands:
cfgDelete “d_efault_Cfg”
zoneDelete “d_efault_Zone”
A cfgSave, cfgEnable, or cfgDisable command must be performed
subsequent to the use of this command to commit the changes and
distribute them to the fabric. If a cfgSave is performed and the fabric is
already in the No Access default zone state, a cfgDisable is sent to the fabric.
For example
:
primaryfcs:admin> defzone --allaccess
primaryfcs:admin> cfgsave
An audit log record is generated for each use of this command.
--show Displays the current state of the default zone access mode
.
Examples To create a default zone configuration:
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration
primaryfcs:admin> defzone
--noaccess
primaryfcs:admin> cfgsave
primaryfcs:admin> defzone
--show
Default Zone Access Mode
committed - No Access
transaction - No Transaction
primaryfcs:admin> cfgactvshow
Effective configuration:
No Effective configuration: (No Access)
See Also none