Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

102 Fabric OS Command Reference
53-1000599-02
diagClearError
2
diagClearError
Clears the diagnostics failure status.
Synopsis diagclearerror [[--slot] slotnumber] -all
Description Use this command to clear the diagnostics failure status.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operand:
--slot slotnumber Specify the slot on which to clear the diagnostics failure status. The default is
set to 0 and designed to operate on fixed-port-count products.
-all If specified, all blades clear
.
If no operand is specified, the default is to clear all bad port flags.
Examples To clear the diag software flag:
switch:admin> diagclearerror 8
ERROR: DIAG CLEARERR
Diagnostics Errors Cleared, port: 8/31
Err# 0120041 081F
See Also none