Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

104 Fabric OS Command Reference
53-1000599-02
diagEnablePost
2
diagEnablePost
Enables power-on self-test (POST) execution at next reboot.
Synopsis diagenablepost
Description Use this command to enable POST. A reboot is not required for this command to take effect. POST
includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system
functionality.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To enable the POST during future power ons:
switch:admin> diagenablepost
Config update Succeeded
Diagnostic POST is now enabled.
See Also diagDisablePost