Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 105
53-1000599-02
diagHelp
2
diagHelp
Displays diagnostic command information.
Synopsis diaghelp
Description Use this command to display a short description of diagnostic commands.
Use default operands when running diagnostics commands. Non-default settings require detailed
knowledge of the underlying hardware and are intended for support personnel only. Contact
support if you want to use these operands.
Operands none
Examples To display diagnostic command information:
switch:admin> diaghelp
bladepropshow display blade properties (***internal take out)
chippropshow display chip properties (***internal take out)
datatypeshow display available diagnostic data types
diaghelp display diagnostic command descriptions
diagoktorun check to see if it is ok to run a diagnostic test
diagshow display diagnostics status
minisregshow display contents of ASIC pair registers.
ptbufshow dump port buffer contents
(output truncated)
See Also none