Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 159
53-1000599-02
fcpRlsShow
2
fcpRlsShow
Displays the Fibre Channel Protocol (FCP) Read Link Status (RLS) information.
Synopsis fcprlsshow [slotnumber/]portnumber
Description Use this command to display the FCP RLS information for the specified F_Port or FL_Port. This
information describes the number of loss-of-signal, loss-of-sync, CRC-error, and other failure events
that have been detected on this port.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to display,
followed by a slash (/).
portnumber Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is required.
Examples To display the FCP RLS information:
switch:admin> fcprlsshow 2/5
link fail loss sync loss sig prtc err bad word crc err
0xda 0 5 0 0 525 0
0xdc 0 3 0 0 330 0
See Also portLoginShow, portLogShow