Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

164 Fabric OS Command Reference
53-1000599-02
fcrConfigure
2
fcrConfigure
Sets FC Router configuration parameters.
Synopsis fcrconfigure
Description Use this command to configure the FC Router parameters for this platform. This is an interactive
command.
This command cannot execute on a system with the FC Router feature enabled. First disable FC
routing by using fosConfig or disable the switch with switchDisable.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command interactively prompts for the following parameter:
Backbone Fabric ID A fabric ID uniquely identifies a fabric in FC Router configurations. The
backbone fabric is the fabric attached to the U_Ports—for example,
E/F_Ports—of this switch. The backbone fabric ID must be unique across all
FC Router-connected fabrics. The current Backbone Fabric ID can be
displayed using the switchShow command.
Examples To configure FC Router parameters:
fcr:admin> fcrconfigure
FC Router parameter set. <cr> to skip a parameter
Backbone fabric ID: (1-128)[100]
See Also fosConfig, switchDisable, switchEnable, switchShow