Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 199
53-1000599-02
ficonShow
2
0xe0 Vendor-specific.
Byte BB 0x00 Unspecified class.
0x01 Direct access storage device, if it is a storage port; otherwise, not
channel-to-channel capable.
0x02 Magnetic tape, if it is a storage port; otherwise, a reserved field for
a channel port.
0x03 Input unit record, if it is a storage port; otherwise, a reserved field
for a channel port.
0x04 Output unit, if it is a storage port; otherwise, a reserved field for a
channel port
0x05 Reserved field for a channel port.
0x06 Controller, if it is a storage port; otherwise, a reserved field for a
channel port.
0x07 Terminal - Full screen if it is a storage port; otherwise, a reserved
field for a channel port.
0x08 Terminal - Line mode if it is a storage port; otherwise, an emulated
control unit support only.
0x09 Reserved.
0x10 Switch, if it is a switch device; otherwise, reserved.
0x0b-0xff
Reserved.
Byte CC 0x00 If storage CU port has registered with the switch.
0xID CHIPID if channel port has registered with the switch.
0xPN If switch has registered with the channel, PN represents the FL port
number.
Part Number Displays the switch chassis part number.
PID Displays the 24-bit Fibre Channel port address in 0xDDAAPP format. DD is
Domain ID. AA is Area ID. PP is AL_PA ID.
Plant of Manufacture
Displays the manufacturer plant name or code.
Port Physical port number.
Port Status Displays the status of the port:
Link degraded but operational
Link not operational
Port Type Displays the port type:
U is unknown.
N is N_Port.
NL is NL_Port.