Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

xxiv Fabric OS Command Reference
53-1000599-02
NOTE
For more information about licensed features refer to the Fabric OS Administrator’s Guide.
Getting technical help
Contact your switch support supplier for hardware, firmware, and software support, including
product repairs and part ordering. To expedite your call, have the following information available:
1. General Information
• Switch model
• Switch operating system version
• Error numbers and messages received
• supportSave command output
• Detailed description of the problem, including the switch or fabric behavior immediately
• following the problem, and specific questions
• Description of any troubleshooting steps already performed and the results
• Serial console and Telnet session logs
• syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label,
as shown here:
:
The serial number label is located as follows:
The serial number label is located as follows:
• Brocade 200E, —On the nonport side of the chassis
• Brocade 4016—On the top of the switch module
• Brocade 4018—On the top of the blade
• Brocade 4020 and 4024—On the bottom of the switch module
• Brocade 300, 4100, 4900, 5100, 5300 and 7500—On the switch ID pull-out tab located
inside the chassis on the port side on the left
• Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the
switch
• Brocade 7600—On the bottom of the chassis
• Brocade 48000—Inside the chassis next to the power supply bays
• Brocade DCX—On the bottom right on the port side of the chassis
3. World Wide Name (WWN)
Use the wwn command to display the switch WWN.
*FT00X0054E9
FT00X0054E9