Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference xxv
53-1000599-02
If you cannot use the wwn command because the switch is inoperable, you can get the WWN from
the same place as the serial number, except for the Brocade DCX. For the Brocade DCX, access the
numbers on the WWN cards by removing the Brocade logo plate at the top of the nonport side of
the chassis.
For the Brocade 4016, 4018, 4020, and 4024 embedded switches: Provide the license ID. Use the
licenseIDShow command to display the WWN.
Document feedback
Quality is our first concern at Brocade, and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
[e-mail]
Provide the title and version number and as much detail as possible about your issue, including the
topic heading and page number and your suggestions for improvement.