Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

232 Fabric OS Command Reference
53-1000599-02
fwConfigure
2
--disable --port portNumber
Disables all thresholds associated with a certain port.
Examples To configure thresholds in Fabric OS mode:
switch:admin> fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa performance Monitor class
8 : EE performance Monitor class
9 : Filter performance Monitor class
10 : Security class
11 : Resource class
12 : Quit
Select a class => : (1..12) [1] 1
1 : Temperature
2 : Fan
3 : Power Supply
4 : return to previous page
Select an area => : (1..4) [4] 1
Index ThresholdName Status CurVal LastEvent LastEventTime LastVal LastState
===========================================================================
1 envTemp001 enabled 33 C started 10:28:59 on 02/01/2000 0 C Informative
2 envTemp002 enabled 34 C started 10:28:59 on 02/01/2000 0 C Informative
3 envTemp003 enabled 36 C started 10:28:59 on 02/01/2000 0 C Informative
4 envTemp004 enabled 35 C started 10:28:59 on 02/01/2000 0 C Informative
5 envTemp005 enabled 36 C started 10:28:59 on 02/01/2000 0 C Informative
1 : refresh
2 : disable a threshold
3 : enable a threshold
4 : advanced configuration
5 : return to previous page
Select choice => : (1..5) [5]
To disable all thresholds associated with port 1:
switch:admin> fwConfigure --disable --port 1
To configure thresholds in Access Gateway mode:
switch:admin> fwconfigure
1 : Environment class
2 : SFP class
3 : Port class
4 : F/FL Port (Optical) class
5 : Resource class
6 : quit
Select a class => : (1..6) [6] 1
1 : Temperature
2 : Fan