Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

250 Fabric OS Command Reference
53-1000599-02
fwShow
2
fwShow
Displays the class thresholds monitored by Fabric Watch.
Synopsis fwshow [--port --persistence] | [--disable --port]
Description Use this command to display the thresholds monitored by Fabric Watch. This command also
displays the port persistence time and ports with all disabled thresholds.
For a description of the class thresholds supported in Fabric OS and the restrictions that apply to
some of the classes in terms of support for V/VE/VEX ports and GbE ports, refer to the help page
for fwConfigure or consult the Fabric Watch Administrator's Guide.
In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper)
class threshold is supported only on Embedded platforms.
Notes This command requires a Fabric Watch license.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands The operands are as follows:
--port --persistence
Displays the time (in seconds) that a port must be persistently in a state
before being marked as such.
--disable --port Displays the ports that have all associated thresholds disabled.
Examples To display thresholds for a fan in the SFP class:
switch:user> fwshow
1 : Show class thresholds
2 : Detail threshold information
3 : Show port persistence time
4 : Quit
Select an item => : (1..4) [3] 1
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
TABLE 14 Access Gateway mode classes
Class
Environmental
SFP
Port
Fabric
F/FL_Port (Optical)
F/FL_Port (Copper)
Resource