Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

274 Fabric OS Command Reference
53-1000599-02
ifModeShow
2
ifModeShow
Displays the link operating mode and MAC address for a network interface.
Synopsis ifmodeshow interface
Description Use this command to display the link operating mode and MAC address for a network interface.
Operands This command has the following operand:
interface Specify the name of the interface. You may specify the name with quotation
marks, but using them is not required. For example, you can use either "eth0"
or eth0, where eth is the network interface and 0 is the physical unit.
Examples To display the link operating mode for the "eth0" Ethernet interface:
switch:admin> ifmodeshow eth0
Link mode: negotiated 100baseTx-HD, link ok
MAC Address: 00:60:69:D0:24:40
See Also ifModeSet