Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

468 Fabric OS Command Reference
53-1000599-02
portCfgShow
2
To display the configuration settings for a single port:
switch:admin> portcfgshow 2/16
Area Number: 144
Speed Level: AUTO
AL_PA Offset 13: OFF
Trunk Port ON
Long Distance OFF
VC Link Init OFF
Locked L_Port OFF
Locked G_Port OFF
Disabled E_Port OFF
ISL R_RDY Mode OFF
RSCN Suppressed OFF
Persistent Disable OFF
NPIV capability ON
QOS E_Port ON
Mirror Port OFF
To display FCIP tunnels configured on a GbE port. (refer to the portCfg help page for an explanation
of the displayed parameters):
switch:admin> portcfgshow 10/ge0
Mode: FCIP
Persistent Disable: OFF
Ipif configuration:
Interface IP Address NetMask MTU
----------------------------------------------------------
0 192.168.60.100 255.255.255.0 1500
1 192.168.60.101 255.255.255.0 2348
2 192.168.60.102 255.255.255.0 1260
3 192.168.60.103 255.255.255.0 1700
4 192.168.60.104 255.255.255.0 1400
5 192.168.60.105 255.255.255.0 2000
6 192.168.60.106 255.255.255.0 1300
7 192.168.60.107 255.255.255.0 2200
Interface IPv6 Address Len MTU
-----------------------------------------------------------
Arp configuration:
IP Address Mac Address
------------------------------
Iproute Configuration:
IP Address Mask Gateway Metric
------------------------------------------------------
IPv6ddress Len Gateway Metric
------------------------------------------------------
Fciptunnel configuration:
IPV4 FCIP TUNNEL(S)
-------------------------------------------
Tunnel ID 0
Remote IP Addr 192.168.60.180
Local IP Addr 192.168.60.100
Remote WWN Not Configured