Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 469
53-1000599-02
portCfgShow
2
Local WWN 10:00:00:05:1e:39:80:65
Compression on
Fastwrite off
Tape Pipelining off
Committed Rate 125000 Kbps (0.125000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
VC QoS Mapping off
DSCP (Control): 10, DSCP (Data): 40
VLAN Tagging Not Configured
VC QoS Map:
VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS
0 46 7 1 07 0 2 11 3 3 15 3
4 19 3 5 23 3 6 27 0 7 31 0
8 35 0 9 39 0 10 43 4 11 47 4
12 51 4 13 55 4 14 59 4 15 63 0
-------------------------------------------
Tunnel ID 1
Remote IP Addr 192.168.60.181
Local IP Addr 192.168.60.101
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:39:80:65
Compression on
Fastwrite off
Tape Pipelining off
Committed Rate 125000 Kbps (0.125000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
VC QoS Mapping off
DSCP (Control): 30, DSCP (Data): 4
VLAN Tagging Not Configured
VC QoS Map:
VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS VC DSCP L2CoS
0 46 7 1 07 0 2 11 3 3 15 3
4 19 3 5 23 3 6 27 0 7 31 0
8 35 0 9 39 0 10 43 4 11 47 4
12 51 4 13 55 4 14 59 4 15 63 0
Vlantag configuration:
-------------------------
Display of VLAN tagging on a GbE port. Refer to the portCfg
help page for an explanation of the displayed parameters.
switch: admin> portcfgshow vlantag 8/ge0
Port: 8/ge0
IpIfAddress VlanId L2 CoS Dest IP Address Flags
-----------------------------------------------------
192.168.10.1 100 7 192.168.10.1 App
192.168.10.1 100 3 0.0.0.0 Perm
See Also portCfg, portCfgCreditRecovery, portCfgEPort, portCfgGPort, portCfgLongDistance,
portCfgLPort, portCfgNPIVPort, portCfgSpeed, portCfgTrunkPort