Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

24 Fabric OS Command Reference
53-1000599-02
ag
2
Deletes the specified WWNs from the list of devices allowed to login to the
specified F_Ports. Lists must be enclosed in double quotation marks. List
members must be separated by semicolons. Replace the F_Port list with an
asterisk (*) to remove the specified WWNs from all the F_Ports' allow lists.
ADS policy must be enabled for this command to succeed.
--adsshow Displays the lits of allowed device WWNs for all F_Ports.
Examples AG show commands
1. To displays the current state of the Access Gateway with Failover (FO) and Failback (FB)
enabled on N_Ports 9 and 12:
switch:admin> ag --show
Name : switch_ST1
NodeName : 10:00:00:05:1e:35:9b:e7
Number of Ports : 16
IP Address(es) : 10.115.74.53
Firmware Version : v6.0.0
N_Ports : 4
F_Ports : 10
Policies enabled : pg
Port Group information :
PG_ID PG_Members PG_Name
--------------------------------------------
0 1;3 pg0
2 0;2 SecondFabric
--------------------------------------------
Fabric Information :
Attached Fabric Name N_Ports
---------------------------------------------
10:00:00:05:1e:34:01:d7 0;1;2;3
---------------------------------------------
N_Port information :
Port PortID Attached PWWN FO FB IP_Addr F_Ports
-----------------------------------------------------------
0 0x6d0a00 20:0a:00:05:1e:37:11:aa 1 0 10.32.74.109 4;5;6;
1 0x6d0b00 20:0b:00:05:1e:37:11:aa 0 1 10.32.74.109 7;8;9;
2 0x6d0c00 20:0c:00:05:1e:37:11:aa 1 0 10.32.74.109 10;11;
3 0x6d0d00 20:0d:00:05:1e:37:11:aa 0 1 10.32.74.109 12;13;
-----------------------------------------------------------
F_Port information :
Port PortID Attached PWWN N_Port Preferred N_port
----------------------------------------------------------
4 0x6d0a01 21:00:00:e0:8b:83:e3:cd 0 2
5 0x6d0a02 21:01:00:e0:8b:a3:e3:cd 0 2
6 0x6d0a03 21:00:00:e0:8b:83:3e:ce 0 2
7 0x6d0b01 21:01:00:e0:8b:a3:3e:ce 1 3
8 0x6d0b02 21:00:00:e0:8b:83:5c:cd 1 3
9 0x6d0b03 21:01:00:e0:8b:a3:5c:cd 1 3
10 0x6d0c02 10:00:00:06:2b:0a:a3:93 2 0
11 0x6d0c01 10:00:00:06:2b:0a:a3:92 2 0
12 0x6d0d02 10:00:00:06:2b:0a:a3:91 3 1
13 0x6d0d01 10:00:00:06:2b:0a:a3:90 3 1
---------------------------------------------------------
2. To display the current Access Gateway mode:
switch:admin> ag --modeshow
Access Gateway mode is enabled.