Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

518 Fabric OS Command Reference
53-1000599-02
portShow
2
The following arguments are supported with ficon:
-globals Displays general FICON controls and statistics.
-images Displays discovered Images (FCUB).
-emul Displays emulated FDCBs.
-active Displays active FDCBs.
-epcb Displays Emulation Control Block (port specific).
-fhpb Displays FICON Host Path Block.
-fdpb adrs Displays FICON Device Path Block.
-fchb Displays FICON Channel Control Block.
-fcub Displays FICON Control Unit Control Block.
-fdcb adrs Displays FICON Device Control Block.
-mem adrs Displays memory in 256 byte increments: ! for next.
-pools Displays current data buffer pool counts.
-pmmr Displays PMMR pointers.
-clear Clears post display statistics; requires a preceding argument.
vlantag Displays VLAN tag configuration settings.
ftrace FTRACE is a debug tool for developers and support (not intended for
customer use). For usage information, execute portShow ftrace.
Examples To display the state of a port:
switch:admin> portshow 3/15
portName:
portHealth: HEALTHY
Authentication: None
portDisableReason: None
portCFlags: 0x1
portFlags: 0x4903 PRESENT ACTIVE E_PORT G_PORT U_PORT
SEGMENTED LOGICAL_ONLINE LOGIN LED
portType: 17.0
portState: 1 Online
portPhys: 6 In_Sync
portScn: 64 Segmented
port generation number: 12
portId: 022f00
portIfId: 4332001e
portWwn: 20:2f:00:05:1e:39:5b:75
portWwn of device(s) connected:
Distance: normal
portSpeed: N4Gbps
LE domain: 0
FC Fastwrite: OFF
Interrupts: 0 Link_failure: 9 Frjt: 0
Unknown: 0 Loss_of_sync: 4810 Fbsy: 0
Lli: 1211464 Loss_of_sig: 9617
Proc_rqrd: 95542 Protocol_err: 0