Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

528 Fabric OS Command Reference
53-1000599-02
portStats64Show
2
stat64_rateRxPeakByte
Rx peak Byte rate (Bps).
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
Occasions on which input buffers are full.
stat64_rxClass1Frames
Class 1 frames received.
Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands This command has the following operands:
slotnumber For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
portnumber Specify a port number to be displayed, relative to its slot for bladed systems.
Use switchShow to display a list of valid ports.
Examples To display the 64-bit hardware statistics for a port:
switch:user> portstats64show 4/15
stat64_wtx 0 top_int : 4-byte words transmitted
316 bottom_int : 4-byte words transmitted
stat64_wrx 0 top_int : 4-byte words received
1486 bottom_int : 4-byte words receive
stat64_ftx 0 top_int : Frames transmitted
69 bottom_int : Frames transmitted
stat64_frx 0 top_int : Frames received
73 bottom_int : Frames received
stat64_c2_frx 0 top_int : Class 2 frames received
0 bottom_int : Class 2 frames received
stat64_c3_frx 0 top_int : Class 3 frames received
37 bottom_int : Class 3 frames received
stat64_lc_rx 0 top_int : Link control frames received
8 bottom_int : Link control frames received
stat64_mc_rx 0 top_int : Multicast frames received
0 bottom_int : Multicast frames received
stat64_mc_to 0 top_int : Multicast timeouts
0 bottom_int : Multicast timeouts
stat64_mc_tx 0 top_int : Multicast frames transmitted
0 bottom_int : Multicast frames transmitted
tim64_rdy_pri 0 top_int : Time R_RDY high priority
60438254 bottom_int : Time R_RDY high priority
tim64_txcrd_z 0 top_int : Time BB_credit zero
2 bottom_int : Time BB_credit zero
er64_enc_in 0 top_int : Encoding errors inside of frames
0 bottom_int : Encoding errors inside of frames
er64_crc 0 top_int : Frames with CRC errors
0 bottom_int : Frames with CRC errors
er64_trunc 0 top_int : Frames shorter than minimum
0 bottom_int : Frames shorter than minimum
er64_toolong 0 top_int : Frames longer than maximum
0 bottom_int : Frames longer than maximum